DAC MODULE PIFI ON RASPBERRY PI 2

[lepmor]

Guy sorry if i trouble i'm completly new on the forum and using runeaudio for the first time . Installed in a SD card and functioning with digital audio . My objective was to have it in function with Analog output so i bought a DAC module PIFI , hardware installed i select it on runeaudio configuration but nothing on output , tryed to connect a headphone but nothing . I see a red led always on in the board but i do not know the meaning because the board arrived with no manual , nothing .
someone can help me ?

[surfninja]

you should state what version of Rune you are using.

I know I've used this DAC with e6, e5 and possibly others.

I think you need to use the hifiberry dac Pro+ drivers for .3 and .4. e5 and e6 you can select the dac in the system settings.

[rastus]

I think you need to use the hifiberry dac Pro+ drivers for .3 and .4. e5 and e6 you can select the dac in the system settings.

The PiFi DAC+ uses the HiFiBerry DAC+, not the "hifiberry dac Pro+".

[surfninja]

The PiFi DAC+ uses the HiFiBerry DAC+, not the "hifiberry dac Pro+".

thanks for the correction

[lepmor]

This is the image i have downloaded :

RuneAudio_rpi2_rp3_0.4-beta_20160321_2GB.img.gz

so means that i have to remove the comment in the file config.txt related to the HIFIBerry DAC+ ?
nothing other ? (for me is already a lot !!!!! ...find the file ... remember how to use sudo nano !!!! and find the right line in the file !!!! )

Thanks guys for the support , this evening i will try doing my best .

[s.k.]

Better use the image from here
https://www.runeaudio.com/forum/runeaudio-r-e6-t7141.html
and follow the instructions on OP

[lepmor]

Ok i will download a create a sd with this image . What is OP ?
have i to do the modification of the file config.txt or with this image "e6" i have to do nothing and my DAC module will be recognized automatically ?

[s.k.]

OP = open post = the first post
Read it carefully

[lepmor]

I have already downloaded the image , can you publish the link where to read this OP ? sorry but i do not understand if you mean the Open post of the page downloading image or where .

[lepmor]

Can you publish the link of the OP .
ANyway considering that excluding the output audio analog , all was functioning .
At the end installing this version have i to modify the config.txt to have the PIFI in function or not ?
Is it necessary to modify others configuration files connected to the objective to have the analog output in function ?