RuneAudio 0.3-alpha for Raspberry Pi

[Chanh]

Hi Guys,

Any chance of knowing if 0.3-beta is coming out soon?
Any aupdate is kindly appreciated!

Cheers,
Chanh

[Woodhouse]

Haha.. You just asked that one big question that nobody dares to ask.....
The topic was effectively silenced.... let's take that as an indicator of the silence before the storm...

But in all seriousness, I am really looking forward to .3 beta...Somewhere in this forum I read that we can expect it in the beginning of October. This software is just great! It has revived my enthusiasm for audio and technology in general. I have at least one fellow raspberry audio enthusiast living nearby and another analog audio enthusiast that I hope to convince with a fine runeaudio 0.3 setup on hifi-berry dac platform.

Right now running 0.3 a and coping with the shortcomings.....

A big heads up to the devs, doing this all in their spare time and giving us a great platform.

[J@r0d]

Hi

I have problem with my ralink usb RT5370 with use hostapd

No problem for launch in 0.2Beta, the hotspot is up, but in 0.3alpha i have error when lauch hostapd

/hostapd-test.conf

#change wlan0 to your wireless device
interface=wlan0
driver=nl80211
ssid=test
channel=1

Code: Select all

[root@runeaudio ~]# nano ~/hostapd-test.conf
[root@runeaudio ~]# hostapd ~/hostapd-test.conf
Configuration file: /root/hostapd-test.conf
nl80211: Could not configure driver mode
nl80211 driver initialization failed.
hostapd_free_hapd_data: Interface wlan0 wasn't started
[root@runeaudio ~]#

If disable wpa-supplicant and ntcl in systemctl i have other error:

Code: Select all

[root@runeaudio ~]# hostapd ~/hostapd-test.conf
Configuration file: /root/hostapd-test.conf
Using interface wlan0 with hwaddr 7c:dd:90:5f:cxx:xx and ssid "test"
wlan0: interface state UNINITIALIZED->ENABLED
wlan0: AP-ENABLED
handle_probe_req: send failed


[J@r0d]

I progress


I resintall img alpha3

PluG RT5370

launch wifi-menu>>>>ok dongle view other AP


launchd hostapd

Code: Select all

[root@runeaudio ~]# hostapd ~/hostapd-test.conf
Configuration file: /root/hostapd-test.conf
nl80211: Could not configure driver mode
nl80211 driver initialization failed.
hostapd_free_hapd_data: Interface wlan0 wasn't started

netctl list:
Wlan0
*Eth0

Code: Select all

● netctl@wlan0.service - wlan0 connection
   Loaded: loaded (/etc/systemd/system/netctl@wlan0.service; enabled)
   Active: failed (Result: exit-code) since Thu 1970-01-01 00:03:38 UTC; 8min ago
     Docs: man:netctl.profile(5)
  Process: 1345 ExecStart=/usr/lib/network/network start %I (code=exited, status=1/FAILURE)
 Main PID: 1345 (code=exited, status=1/FAILURE)
[root@runeaudio system]#

After netctl start wlan0:

Code: Select all

[root@runeaudio system]# netctl status wlan0
● netctl@wlan0.service - wlan0 connection
   Loaded: loaded (/etc/systemd/system/netctl@wlan0.service; enabled)
   Active: activating (start) since Thu 1970-01-01 00:12:59 UTC; 19s ago
     Docs: man:netctl.profile(5)
 Main PID: 1930 (network)
   CGroup: /system.slice/system-netctl.slice/netctl@wlan0.service
           ├─1930 /bin/bash /usr/lib/network/network start wlan0
           ├─1936 wpa_supplicant -B -P /run/wpa_supplicant_wlan0.pid -i wlan0 -D nl80211,wext -c/etc/wpa_supplicant/wpa_supplicant.conf
           └─2286 sleep 0.2
[root@runeaudio system]#


Launch Hostapd:

Code: Select all

[root@runeaudio system]# hostapd ~/hostapd-test.conf
Configuration file: /root/hostapd-test.conf
Using interface wlan0 with hwaddr 7c:dd:90:5f:xx:xx and ssid "test"
wlan0: interface state UNINITIALIZED->ENABLED
wlan0: AP-ENABLED


My android phone view AP



What solution for resolve my problem ?

For my caraudio application i want use only AP mod

[challenge]

Please if it's not ready/good enough for beta stage, release it and call it alpha1, at least we can test and report bugs
There are so many new functions on git after 0.3alpha we could try!
Are you planning to automate builds in future to let users build development snapshots from git?

Thx for the great job.

[Peter]

franz159 wrote:Is there any ETA for the 0.3 beta and 0.4 releases?


Respectively at begin and end of october, hopefully

???

[Aquarius]

Dear all,

I made my first serious high volume listening tests with 0.3 alpha yesterday and I have a problem.

On each and action on the playback change song/skip/start/stop, I have a very anoying high pitched pop (the kind of thing I don't want in the long run to not destroy my tweeters).

I tried every kernel profile, to check if one of them would make this pop disapear, to no avail.

I'm pretty sure it's a problem of buffer or a driver issue. The idea being that, basically, the first bits (after "play") or last bits (after "stop") sent on my Hifiberry Digi Coax output result in this pop.

- The issue also comes when using my Grado headphones.
- The issue is **not** present when using my streamer to feed the DAC directly. (the streamer feeds I²S directly to the DAC).

Cheers!

[Peter]

franz159 wrote:Is there any ETA for the 0.3 beta and 0.4 releases?


Respectively at begin and end of october, hopefully




??????????????

[Peter]

So Long, and Thanks for All the Fish

[Devox]

As I understood it, there are three guys who are spending their free time, beside their daily jobs, working on this rather complex Project.
I guess delays of the schedule they planned are totally normal under that circumstances, and you just can't hold them accountable for something they do for fun. Not even for talking much about those delays, because that would all end in senseless discussions with some users, keeping the Rune-creators even more away from accomplishing their tasks.

For my part, I'm just happy if 0.3beta gets released this Year. That's a rather healthy way of looking at the situation, i guess. Protects you from getting to anxious.