Posted: 12 Jul 2018, 10:47
Thanks!Posted: 18 Jul 2018, 01:42memi0 wrote:Hi, newbie here.. anybody who managed to make it run on RPi 3 B+ would be so kind to upload an image file?
So I would be able to test it on my RPi 3 B+ too.
File: RuneAudio_0.4_20180629_SC_Pi3B_Plus_v3_tml3nr.rar
CRC-32: cf9650f4
MD4: 6e5f0d3e481a6bba45b39929ae031365
MD5: ac9feadd693cdbb4dcee8d944172a43c
SHA-1: 1bb4d05ed651867b0732ad0439b10a2a98a29ccbPosted: 22 Jul 2018, 15:22tml3nr wrote:memi0 wrote:Hi, newbie here.. anybody who managed to make it run on RPi 3 B+ would be so kind to upload an image file?
So I would be able to test it on my RPi 3 B+ too.
IMG file from my post:
rpi-3-b-t6393.html#p25369
Download:
http://www.mediafire.com/file/ic252lrdf ... tml3nr.rar
Mirror:
https://www.fshare.vn/file/GWYV887Z5EB3
Posted: 23 Jul 2018, 16:19stanleychin wrote:tml3nr wrote:memi0 wrote:Hi, newbie here.. anybody who managed to make it run on RPi 3 B+ would be so kind to upload an image file?
So I would be able to test it on my RPi 3 B+ too.
IMG file from my post:
rpi-3-b-t6393.html#p25369
Download:
http://www.mediafire.com/file/ic252lrdf ... tml3nr.rar
Mirror:
https://www.fshare.vn/file/GWYV887Z5EB3
I've download the file,but the 7 zip can't open the archive. There's a error message says can't open.
stanleychin
Posted: 23 Jul 2018, 23:05Posted: 24 Jul 2018, 00:57fox.peko wrote:Hi all,
this img works wiht my rs pi3+ but I have problem with my sound card IQaudIO Pi-Digi+ . This model is not in Audio outputs list. Is some possible way to update it .
Thank you very much
Posted: 24 Jul 2018, 08:42tml3nr wrote:fox.peko wrote:Hi all,
this img works wiht my rs pi3+ but I have problem with my sound card IQaudIO Pi-Digi+ . This model is not in Audio outputs list. Is some possible way to update it .
Thank you very much
It's here:
Posted: 24 Jul 2018, 17:12Enable I²S output selecting one of the available drivers, specific for each hardware. After rebooting the output interface will appear in the MPD configuration select menu, and drivers will also auto-load from the next reboot.
Posted: 25 Jul 2018, 07:28hondagx35 wrote:Hi,
did you reboot your device?Enable I²S output selecting one of the available drivers, specific for each hardware. After rebooting the output interface will appear in the MPD configuration select menu, and drivers will also auto-load from the next reboot.
Frank
) Posted: 27 Jul 2018, 13:17
Thanks for the answer