Re: [BugFix] HiFiBerry DAC+ HW Volume (RuneAudio 0.3-beta)
Posted:
29 Nov 2016, 04:21
by Tom2112
So what would you recommend? Just use software volume control?
Does this affect all DACs? I'm experiencing it on my SainSmart SX400 (which pretends to be an IQaudIO DAC+).
Re: [BugFix] HiFiBerry DAC+ HW Volume (RuneAudio 0.3-beta)
Posted:
12 Dec 2016, 03:22
by bloodnok
matt wrote:Thanks for this, I got it to work this time.
I also find that the volume control is really only usable between 60 and 100, can we fix this or is it a hardware issue?
I have just released a hack for this. There is an executable for Pi model 1 which you can try.
https://github.com/marcmunro/MPD
Re: [BugFix] HiFiBerry DAC+ HW Volume (RuneAudio 0.3-beta)
Posted:
10 Feb 2018, 19:35
by snafu
Hmmm. When I run the "redis-cli.....", I get- "(interger) 0" displayed. Is that a good thing or a bad thing?
Then when I run the "refresh_ao" I get "command not found".
My guess is the refresh_ao error is a path related issue? Which folder does this command reside?
I'm using a HiFiBerry Dac+. It's working except the hardware volume control fails to work. Software enabled works, but it effects the sound quality. I'm hoping if I can get your command to work, it'll fix this.
Re: [BugFix] HiFiBerry DAC+ HW Volume (RuneAudio 0.3-beta)
Posted:
27 Mar 2019, 20:43
by drfrink24
Hello,
I've tried all the suggestions here, and I can't get HW volume control to work with HifiBerry Dac+ Pro and Pi2, I think its related to the fact that I can't get the audio_output mpd.config, as shown below from the guide to match the same syntax.
Any ideas?
#expected output
audio_output {
name "snd_rpi_hifiberry_dacplus"
type "alsa"
device "hw:1,0"
mixer_control "Master"
mixer_type "hardware"
mixer_device "hw:1"
auto_resample "no"
auto_format "no"
enabled "yes"
#my output
audio_output {
name "snd_rpi_hifiberry_dacplus"
type "alsa"
device "hw:1,0"
mixer_control "Digital"
mixer_type "hardware"
mixer_device "hw:1"
auto_resample "no"
auto_format "no"
enabled "yes"
}
Entire dump:
Re: [BugFix] HiFiBerry DAC+ HW Volume (RuneAudio 0.3-beta)
Posted:
29 Mar 2019, 12:12
by janui
Hi drfrink24,
drfrink24 wrote:…I can't get HW volume control to work with HifiBerry Dac+ Pro…
I have the same DAC, no problems, it really does work. See this post for a possible solution:
post26802.html This problem has been fixed in the latest version of 0.5b.
janui
Re: [BugFix] HiFiBerry DAC+ HW Volume (RuneAudio 0.3-beta)
Posted:
12 Apr 2021, 00:43
by rastus
Hello janui,
long time no see. I hope you and yours are well.
Regards,
Rastus