Hi,
I have some news:
arm_freq=1000
gpu_freq=300
core_freq=400
over_voltage=6
force_turbo=1
Without setting the CPU frequency for the Raspberry Zero to 1000 MHz it is set to the frequency of the Raspberry 1. This is shown by the debug output: "bcm2835-cpufreq: min=700000 max=700000". So in order to enable the 1000 Mhz you have to add the corresponding entries in the
config.txtBefore doing this please try to update to our Nightly Builds first.
Done
Used the tutorial in
http://www.runeaudio.com/documentation/troubleshooting/updating/ using the dev branch. After restart the credits page shows "release version: (build: beta-20141027)", but when I chek the latest commit it was
- Code: Select all
commit e6f6474bc90e1da82a619e3df5b362a04e0b1763
Author: hondagx35 <github@friedmann-elektronik.de>
Date: Wed May 25 23:54:59 2016 +0200
sorting for saved playlists
so I guess the credits page is outdated.
I also would like to see the debug info.
Is it recognized as RP1 (MENU->Debug)?
When I log in via ssh it says: "Hw-env: RaspberryPi"
The Debug output says the same: "HW platform: RaspberryPi (01)"
Hm, if I upload your image how will I connect to my network? Since Zero don't have ethernet I can't configure Rune to connect to my WiFi network...
I added a "temporary" wifi network to make a direct use of the Raspberry Zero possible. The Zero should autoconnect to the following wifi:
SSID: test
PASS: abcdefghabcdefgh
My assumption using the file
- Code: Select all
etc/network/interfaces
for wifi settings is wrong, so I don't know how to manually add a WiFi.
@flega Would be nice if you could test if the autoconnection works!
Here is the link to the image file which is zipped using gzip:
http://www.mediafire.com/download/kzy8txlqadxly48/20160618_runeaudio_raspberry1_raspberryZero.img.gzThe SHA256 hash of the file is: d303bbb82f8171d7e529ace2bd05dff390fdd4c9726f808c2e2e4a43079447f2
http://www.mediafire.com/download/c846hxue9sfwr3c/20160618_runeaudio_raspberry1_raspberryZero.img.gz.sha256