pi3 and pifi dac+ 2.0 is not working
Posted: 25 Dec 2016, 11:25Dear All.
I have pi3 and pifi dac+ 2.0
i'm tried to set all procedure refer http://www.runeaudio.com/documentation/troubleshooting/rpi-troubleshooting/
but it's not working. anyone can help me?
i tried 2 options.
1. set hifiberry dac : aplay -l show device but can not output sounds.
2. set hifiberry dac plus : aplay -l doesnt show device
please advice.
I have pi3 and pifi dac+ 2.0
i'm tried to set all procedure refer http://www.runeaudio.com/documentation/troubleshooting/rpi-troubleshooting/
but it's not working. anyone can help me?
i tried 2 options.
1. set hifiberry dac : aplay -l show device but can not output sounds.
2. set hifiberry dac plus : aplay -l doesnt show device
please advice.
- Code: Select all
###### System info ######
Linux version 4.1.20-1-ARCH (builduser@leming) (gcc version 5.3.0 (GCC) ) #1 SMP Sat Mar 19 20:07:23 MDT 2016
system time: Sun Dec 25 11:14:12 CET 2016
system load: 0.93 0.31 0.11 1/168 890
HW platform: RaspberryPi2 (08)
playerID: 08b26fff2ac4ddac6fee7fbbc1890504ae
###### System load statistics (procinfo -H) ######
Memory: Total Used Free Buffers
RAM: 922.67MiB 285.23MiB 637.44MiB 17.60MiB
Swap: 0.00B 0.00B 0.00B
Bootup: Sun Dec 25 11:13:23 2016 Load average: 0.93 0.31 0.11 1/170 892
user : 00:00:09.94 5.2% page in : 170629
nice : 00:00:09.74 5.1% page out: 1376
system: 00:00:14.30 7.4% page act: 11542
IOwait: 00:00:15.76 8.2% page dea: 0
hw irq: 00:00:00.00 0.0% page flt: 154804
sw irq: 00:00:00.32 0.2% swap in : 0
idle : 00:02:22.28 74.0% swap out: 0
uptime: 00:00:48.88 context : 70230
irq 16: 0 irq 65: 19
irq 20: 0 irq 66: 2
irq 21: 0 irq 75: 1
irq 29: 311 irq 77: 3769
irq 31: 1 irq 82: 128
irq 32: 16692 irq 84: 5492
irq 49: 0 irq 96: 0
irq 50: 0 irq 97: 12773
mmcblk0 3711r mmcblk0p2 3613r
mmcblk0p1 59r
eth0 TX 231.80KiB RX 30.17KiB wlan0 TX 0.00B RX 7.67KiB
lo TX 1.05MiB RX 1.05MiB
###### Active processes (pstree) ######
systemd-+-2*[agetty]
|-at-spi-bus-laun-+-dbus-daemon
| |-{dconf worker}
| |-{gdbus}
| `-{gmain}
|-at-spi2-registr-+-{gdbus}
| `-{gmain}
|-avahi-daemon---avahi-daemon
|-cmd_async---sh---sudo---xinit-+-Xorg-+-{llvmpipe-0}
| | |-{llvmpipe-1}
| | |-{llvmpipe-2}
| | `-{llvmpipe-3}
| `-sh-+-matchbox-window
| `-midori-+-{dconf worker}
| |-{gdbus}
| |-{gmain}
| |-{llvmpipe-0}
| |-{llvmpipe-1}
| |-{llvmpipe-2}
| |-{llvmpipe-3}
| `-2*[{midori}]
|-2*[dbus-daemon]
|-dbus-launch
|-devmon---udevil
|-dhcpcd
|-ifplugd
|-mpd-+-{decoder}
| |-{io}
| |-{output:snd_rpi_}
| `-{player}
|-nginx---nginx
|-nmbd
|-ntpd---{ntpd}
|-php-fpm---3*[php-fpm]
|-redis-server---2*[{redis-server}]
|-rune_PL_wrk
|-rune_SY_wrk---sh---debug_collector---sh---pstree
|-sh---sleep
|-shairport---{shairport}
|-smbd---smbd
|-sshd---sshd---bash
|-systemd-journal
|-systemd-resolve
|-systemd-udevd
|-upmpdcli---7*[{upmpdcli}]
|-wpa_supplicant
`-xbindkeys
###### Audio backend ######
Advanced Linux Sound Architecture Driver Version k4.1.20-1-ARCH.
Card list: (/proc/asound/cards)
--------------------------------------------------
0 [sndrpihifiberry]: snd_rpi_hifiber - snd_rpi_hifiberry_dac
snd_rpi_hifiberry_dac
PLAYBACK devices: (aplay -l)
--------------------------------------------------
**** List of PLAYBACK Hardware Devices ****
card 0: sndrpihifiberry [snd_rpi_hifiberry_dac], device 0: HifiBerry DAC HiFi pcm5102a-hifi-0 []
Subdevices: 1/1
Subdevice #0: subdevice #0
PCM devices: (aplay -L)
--------------------------------------------------
null
Discard all samples (playback) or generate zero samples (capture)
default:CARD=sndrpihifiberry
snd_rpi_hifiberry_dac,
Default Audio Device
sysdefault:CARD=sndrpihifiberry
snd_rpi_hifiberry_dac,
Default Audio Device
Simple mixer controls: (amixer scontrols)
--------------------------------------------------
card 0:
no mixer scontrols
Mixer controls: (amixer controls)
--------------------------------------------------
card 0:
no mixer controls
MPD audio outputs status: (mpc outputs)
--------------------------------------------------
Output 1 (snd_rpi_hifiberry_dac) is enabled
###### mpd version ######
mpd version: 0.19.0
###### mpd.conf ######
###################################
# Auto generated mpd.conf file
# please DO NOT edit it manually!
# Use RuneUI MPD config section
###################################
log_level "default"
log_file "/var/log/runeaudio/mpd.log"
state_file "/var/lib/mpd/mpdstate"
zeroconf_enabled "yes"
zeroconf_name "runeaudio"
bind_to_address "/run/mpd.sock"
bind_to_address "any"
port "6600"
max_connections "20"
user "mpd"
group "audio"
db_file "/var/lib/mpd/mpd.db"
sticker_file "/var/lib/mpd/sticker.sql"
pid_file "/var/run/mpd/pid"
music_directory "/mnt/MPD"
playlist_directory "/var/lib/mpd/playlists"
follow_outside_symlinks "yes"
follow_inside_symlinks "yes"
auto_update "no"
filesystem_charset "UTF-8"
id3v1_encoding "UTF-8"
volume_normalization "no"
audio_buffer_size "2048"
buffer_before_play "20%"
gapless_mp3_playback "yes"
mixer_type "software"
input {
plugin "curl"
}
decoder {
plugin "ffmpeg"
enabled "yes"
}
replaygain "off"
audio_output {
name "snd_rpi_hifiberry_dac"
type "alsa"
device "hw:0,0"
auto_resample "no"
auto_format "no"
enabled "yes"
}
###### Kernel optimization parameters ######
hardware platform: RaspberryPi2
current orionprofile: RuneAudio
kernel scheduler for mmcblk0: [noop] deadline cfq bfq
/proc/sys/vm/swappiness: 0
/proc/sys/kernel/sched_latency_ns: 18000000
/proc/sys/kernel/sched_rt_period_us: 1000000
/proc/sys/kernel/sched_rt_runtime_us: 950000
/proc/sys/kernel/sched_autogroup_enabled: 1
/proc/sys/kernel/sched_rr_timeslice_ms: 10
/proc/sys/kernel/sched_min_granularity_ns: 2250000
/proc/sys/kernel/sched_wakeup_granularity_ns: 3000000
###### Kernel module snd_usb_audio settings ######
Error opening module snd_usb_audio