Settings not saving; getting logged out

Raspberry Pi related support

Settings not saving; getting logged out

Postby sduck » 18 Feb 2017, 05:12

Please bear with me, newbie here.

Just set up Runeaudio on a raspberry pi 3B with a hifiberry DAC+ card installed. Set it up according to instructions, got wifi working, can log in via my browser. Edited the config.txt file to use the hifiberry. I can get into the MPD settings, and select the hifiberry dac+ option, save settings, and can start playing a track off a usb drive. However, the browser interface then immediately locks up, becomes unresponsive. The player keeps playing, but won't stop or anything. I have to unplug the device and reboot it to log back in. When I do, it has reset to the default internal dac setting.

This is as far as I've gotten with this - and it's very frustrating. None of this is covered in the troubleshooting. I'm probably not providing nearly enough details - I'm using a mac, up to date everything. Please let me know what I need to tell you to help you help me - thanks!
sduck
 
Posts: 23
Joined: 18 Feb 2017, 04:18

Re: Settings not saving; getting logged out

Postby hondagx35 » 18 Feb 2017, 08:44

Hi sduck,

changing the output device works on the fly, do not save anything.

Before playing a song wait until the database is indexed.
Depending on the size of your library this may take some minutes.
On the bottum left (library button) you should see a spinning sing during update.

Frank
User avatar
hondagx35
 
Posts: 3042
Joined: 11 Sep 2014, 22:06
Location: Germany

Re: Settings not saving; getting logged out

Postby sduck » 23 Feb 2017, 15:30

Why would there be a Save button then? And why isn't the DAC+ remembered? I shouldn't have to reset the audio output setting every time i turn it on.

I've waited until the database is indexed. That's not an issue.

Still would like to know why the connection to the player cuts off after a few seconds of playing. Makes the thing unusable.
sduck
 
Posts: 23
Joined: 18 Feb 2017, 04:18

Re: Settings not saving; getting logged out

Postby hondagx35 » 23 Feb 2017, 16:03

Hi sduck,

Why would there be a Save button then?

Because all other settings need to be saved after changing them.

And why isn't the DAC+ remembered?

I have no idea what is going wrong on your system.

Please try a different browser and temporarily disable security settings on your browser.

Frank
User avatar
hondagx35
 
Posts: 3042
Joined: 11 Sep 2014, 22:06
Location: Germany

Re: Settings not saving; getting logged out

Postby sduck » 23 Feb 2017, 23:05

Ok, after some experimentation with volumio, which also had problems, I'm back to using runeaudio. Perhaps it was reinstalling it, or maybe using a different address to access the player ui, but it seems to be working now. No longer freezing up. Haven't done enough experimentation to see if settings are getting saved or not, but so far no problems.
sduck
 
Posts: 23
Joined: 18 Feb 2017, 04:18

Re: Settings not saving; getting logged out

Postby sduck » 19 Mar 2017, 20:07

So after a brief honeymoon where everything worked, it's back to the same stuff. I can start a file playing, but then everything locks up - can't stop playing, access any menus, reload the ui, nothing. And it's not saving the configuration again.

This completely sucks. Considering throwing this toy away.
sduck
 
Posts: 23
Joined: 18 Feb 2017, 04:18

Re: Settings not saving; getting logged out

Postby sduck » 20 Mar 2017, 16:27

Ok, haven't given up yet. I reinstalled the latest beta version (0.4 Beta) on a fresh mUsd card. Again, it's a raspypi 3B, with a hifiberry Dac+ Pro. It installed ok, set it up with a wired ethernet connection so that wifi was connected, brought the unit upstairs to my studio, hooked it into my stereo, where it is now only connected via wifi - no direct ethernet. I've plugged in a usb flash drive with several albums on it, and configured a NAS with the Music folder on my mac as per another recent thread (and spent the hour or more it took lo set up the library). Everything connects fine, the UI loads on my wifi connected Macbook Pro (running the latest OS - Sierra OS X 10.12.3). I get the following behavior no matter which browser I try - I have safari, firefox waterfox and chrome installed. This bad behavior is the same stuff I was getting with the v0.3-beta (23/03/2016) version I had installed previously.

However, I'm getting the same bad behavior - once i start a track playing the system immediately locks up, locking me out form any further interaction. The track will finish playing, and the clock on the left of the UI will keep on running even though the track has ended, but nothing added to the playlist will play - in fact has't even been added to the playlist as the unit has already locked up. The only way to get back to any kind of control is to physically unplug and replug the power - the reboot/shutdown commands in the menu don't work.

Here's some log stuff - had to delete a bunch of it because it was too large, hope the right stuff is still here

Code: Select all
###### System info ######
Linux version 4.4.39-ARCH+ (frank@franks-ubuntu) (gcc version 4.8.3 20140106 (prerelease) (crosstool-NG linaro-1.13.1-4.8-2014.01 - Linaro GCC 2013.11) ) #5 SMP Sat Feb 11 15:43:36 CET 2017

system time:   Mon Mar 20 10:01:16 CDT 2017

system load:   0.08 0.06 0.04 1/183 1822

HW platform:   RaspberryPi2 (08)

playerID:   08b26fff2ac4ddac6fee7fbbc1890504ae


###### Boot configuration ######
# Uncomment some or all of these to enable the optional hardware interfaces
# Params:
#         i2c_arm                  Set to "on" to enable the ARM's i2c interface
#                                  (default "off")
#         i2c_vc                   Set to "on" to enable the i2c interface
#                                  usually reserved for the VideoCore processor
#                                  (default "off")
#         i2c_arm_baudrate         Set the baudrate of the ARM's i2c interface
#                                  (default "100000")
#         i2c_vc_baudrate          Set the baudrate of the VideoCore i2c interface
#                                  (default "100000")
#         i2c_baudrate             An alias for i2c_arm_baudrate
#         i2s                      Set to "on" to enable the i2s interface
#                                  (default "off")
#         spi                      Set to "on" to enable the spi interfaces
#                                  (default "off")
#         act_led_trigger          Choose which activity the LED tracks.
#                                  Use "heartbeat" for a nice load indicator.
#                                  (default "mmc")
#         act_led_activelow        Set to "on" to invert the sense of the LED
#                                  (default "off")
#         act_led_gpio             Set which GPIO pin to use for the activity LED
#                                  (in case you want to connect it to an external
#                                  device)
#                                  (default "16" on a non-Plus board, "47" on a
#                                  Plus or Pi 2)
#         N.B. It is recommended to only enable those interfaces that are needed.
#         Leaving all interfaces enabled can lead to unwanted behaviour (i2c_vc
#         interfering with Pi Camera, I2S and SPI hogging GPIO pins, etc.)
#         Note also that i2c, i2c_arm and i2c_vc are aliases for the physical
#         interfaces i2c0 and i2c1. Use of the numeric variants is still possible
#         but deprecated because the ARM/VC assignments differ between board
#         revisions. The same board-specific mapping applies to i2c_baudrate,
#         and the other i2c baudrate parameters.

#dtparam=i2c_arm=on
#dtparam=i2c_vc=on
#dtparam=i2s=on
#dtparam=spi=on
#dtparam=act_led_trigger=mmc
#dtdebug=on

#dtparam=uart1=off
#dtoverlay=pi3-disable-bt-overlay
#dtoverlay=pi3-miniuart-bt-overlay

## RuneAudio HDMI & 3,5mm jack
dtparam=audio=on

## RuneAudio I2S-Settings
dtoverlay=hifiberry-dacplus

# Uncomment to enable the lirc-rpi module
# Params: gpio_out_pin             GPIO pin for output (default "17")
#         gpio_in_pin              GPIO pin for input (default "18")
#         gpio_in_pull             Pull up/down/off on the input pin
#                                  (default "down")
#         sense                    Override the IR receive auto-detection logic:
#                                    "1" = force active high
#                                    "0" = force active low
#                                    "-1" = use auto-detection
#                                  (default "-1")
#         softcarrier              Turn the software carrier "on" or "off"
#                                  (default "on")
#         invert                   "on" = invert the output pin (default "off")
#         debug                    "on" = enable additional debug messages
#                                  (default "off")
#dtoverlay=lirc-rpi
#dtparam=gpio_out_pin=17
#dtparam=gpio_in_pin=18
#dtparam=gpio_in_pull=down

# LCD settings
# 180 degrees
#lcd_rotate=2
# Normal
lcd_rotate=0
#dtoverlay=rpi-backlight
#dtoverlay=rpi-ft5406
disable_splash=1

# Uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1

# Uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1

# Uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16

# Uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720

# Uncomment if hdmi display is not detected and composite is being output
#hdmi_force_hotplug=1

# Uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1

# Uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
hdmi_drive=2

# Uncomment to set monitor mode to DMT
#hdmi_group=2

# Uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4

# setting the max usb current to 1200mA
max_usb_current=1

# memory options
gpu_mem=64

# Overclocking options
force_turbo=1


##################################################


###### System load statistics (procinfo -H) ######
Memory:        Total        Used        Free     Buffers
RAM:       922.56MiB   339.50MiB   583.05MiB    28.13MiB
Swap:          0.00B       0.00B       0.00B

Bootup: Mon Mar 20 09:38:47 2017   Load average: 0.08 0.06 0.04 1/185 1824

user  :   00:00:20.27   0.4%  page in :           193119
nice  :   00:01:11.84   1.3%  page out:             3208
system:   00:00:34.71   0.6%  page act:            12361
IOwait:   00:00:13.08   0.2%  page dea:                0
hw irq:   00:00:00.00   0.0%  page flt:           310601
sw irq:   00:00:00.49   0.0%  swap in :                0
idle  :   01:27:26.07  97.4%  swap out:                0
uptime:   00:22:28.56         context :           494999

irq  16:          0                      irq  51:          0
irq  17:     191317                      irq  54:          0
irq  23:         23                      irq  62:     381021
irq  24:          2                      irq  79:          0
irq  39:          1                      irq  80:          0
irq  46:          0                      irq  83:        128
irq  48:       4725                      irq  86:        312
irq  50:          0                      irq  92:      28413

mmcblk0            4483r             2   mmcblk0p2            4378r
mmcblk0p1              63r               sda              540r               1w

eth0        TX 0.00B         RX 0.00B         wlan0       TX 135.86KiB     RX 358.73KiB
lo          TX 1.18MiB       RX 1.18MiB


###### Active processes (pstree) ######
systemd-+-at-spi-bus-laun-+-dbus-daemon
        |                 |-{dconf worker}
        |                 |-{gdbus}
        |                 `-{gmain}
        |-at-spi2-registr-+-{gdbus}
        |                 `-{gmain}
        |-avahi-daemon---avahi-daemon
        |-cmd_async---sh---sudo---xinit-+-Xorg-+-{llvmpipe-0}
        |                               |      |-{llvmpipe-1}
        |                               |      |-{llvmpipe-2}
        |                               |      `-{llvmpipe-3}
        |                               `-sh-+-matchbox-window
        |                                    `-midori-+-{dconf worker}
        |                                             |-{gdbus}
        |                                             |-{gmain}
        |                                             |-{llvmpipe-0}
        |                                             |-{llvmpipe-1}
        |                                             |-{llvmpipe-2}
        |                                             |-{llvmpipe-3}
        |                                             |-2*[{midori}]
        |                                             `-{pool}
        |-2*[dbus-daemon]
        |-dbus-launch
        |-devmon---udevil
        |-dhcpcd
        |-haveged
        |-ifplugd
        |-mpd-+-{decoder}
        |     |-{io}
        |     |-{output:snd_rpi_}
        |     `-{player}
        |-nginx---nginx
        |-nmbd
        |-ntpd---{ntpd}
        |-php-fpm---3*[php-fpm]
        |-python
        |-redis-server---2*[{redis-server}]
        |-rune_PL_wrk
        |-rune_SY_wrk---sh---debug_collector---sh---pstree
        |-sh---sleep
        |-shairport---{shairport}
        |-sshd
        |-systemd-journal
        |-systemd-udevd
        |-wpa_actiond
        |-wpa_supplicant
        `-xbindkeys


###### Audio backend ######
Advanced Linux Sound Architecture Driver Version k4.4.39-ARCH+.

Card list: (/proc/asound/cards)
--------------------------------------------------
 0 [ALSA           ]: bcm2835 - bcm2835 ALSA
                      bcm2835 ALSA
 1 [sndrpihifiberry]: snd_rpi_hifiber - snd_rpi_hifiberry_dacplus
                      snd_rpi_hifiberry_dacplus


PLAYBACK devices: (aplay -l)
--------------------------------------------------
**** List of PLAYBACK Hardware Devices ****
card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA]
  Subdevices: 8/8
  Subdevice #0: subdevice #0
  Subdevice #1: subdevice #1
  Subdevice #2: subdevice #2
  Subdevice #3: subdevice #3
  Subdevice #4: subdevice #4
  Subdevice #5: subdevice #5
  Subdevice #6: subdevice #6
  Subdevice #7: subdevice #7
card 0: ALSA [bcm2835 ALSA], device 1: bcm2835 ALSA [bcm2835 IEC958/HDMI]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: sndrpihifiberry [snd_rpi_hifiberry_dacplus], device 0: HiFiBerry DAC+ Pro HiFi pcm512x-hifi-0 []
  Subdevices: 1/1
  Subdevice #0: subdevice #0


PCM devices: (aplay -L)
--------------------------------------------------
null
    Discard all samples (playback) or generate zero samples (capture)
default:CARD=ALSA
    bcm2835 ALSA, bcm2835 ALSA
    Default Audio Device
sysdefault:CARD=ALSA
    bcm2835 ALSA, bcm2835 ALSA
    Default Audio Device
default:CARD=sndrpihifiberry
    snd_rpi_hifiberry_dacplus,
    Default Audio Device
sysdefault:CARD=sndrpihifiberry
    snd_rpi_hifiberry_dacplus,
    Default Audio Device


Simple mixer controls: (amixer scontrols)
--------------------------------------------------
card 0:
Simple mixer control 'PCM',0

card 1:
Simple mixer control 'DSP Program',0
Simple mixer control 'Analogue',0
Simple mixer control 'Analogue Playback Boost',0
Simple mixer control 'Auto Mute',0
Simple mixer control 'Auto Mute Mono',0
Simple mixer control 'Auto Mute Time Left',0
Simple mixer control 'Auto Mute Time Right',0
Simple mixer control 'Clock Missing Period',0
Simple mixer control 'Deemphasis',0
Simple mixer control 'Digital',0
Simple mixer control 'Max Overclock DAC',0
Simple mixer control 'Max Overclock DSP',0
Simple mixer control 'Max Overclock PLL',0
Simple mixer control 'Volume Ramp Down Emergency Rate',0
Simple mixer control 'Volume Ramp Down Emergency Step',0
Simple mixer control 'Volume Ramp Down Rate',0
Simple mixer control 'Volume Ramp Down Step',0
Simple mixer control 'Volume Ramp Up Rate',0
Simple mixer control 'Volume Ramp Up Step',0


Mixer controls: (amixer controls)
--------------------------------------------------
card 0:
numid=3,iface=MIXER,name='PCM Playback Route'
numid=2,iface=MIXER,name='PCM Playback Switch'
numid=1,iface=MIXER,name='PCM Playback Volume'
numid=5,iface=PCM,name='IEC958 Playback Con Mask'
numid=4,iface=PCM,name='IEC958 Playback Default'

card 1:
numid=6,iface=MIXER,name='DSP Program'
numid=3,iface=MIXER,name='Analogue Playback Boost Volume'
numid=2,iface=MIXER,name='Analogue Playback Volume'
numid=10,iface=MIXER,name='Auto Mute Mono Switch'
numid=11,iface=MIXER,name='Auto Mute Switch'
numid=8,iface=MIXER,name='Auto Mute Time Left'
numid=9,iface=MIXER,name='Auto Mute Time Right'
numid=7,iface=MIXER,name='Clock Missing Period'
numid=5,iface=MIXER,name='Deemphasis Switch'
numid=4,iface=MIXER,name='Digital Playback Switch'
numid=1,iface=MIXER,name='Digital Playback Volume'
numid=20,iface=MIXER,name='Max Overclock DAC'
numid=19,iface=MIXER,name='Max Overclock DSP'
numid=18,iface=MIXER,name='Max Overclock PLL'
numid=16,iface=MIXER,name='Volume Ramp Down Emergency Rate'
numid=17,iface=MIXER,name='Volume Ramp Down Emergency Step'
numid=12,iface=MIXER,name='Volume Ramp Down Rate'
numid=13,iface=MIXER,name='Volume Ramp Down Step'
numid=14,iface=MIXER,name='Volume Ramp Up Rate'
numid=15,iface=MIXER,name='Volume Ramp Up Step'


MPD audio outputs status: (mpc outputs)
--------------------------------------------------
Output 1 (snd_rpi_hifiberry_dacplus) is enabled
Output 2 (bcm2835 ALSA_1) is disabled
Output 3 (bcm2835 ALSA_2) is disabled

MPD statistics: (mpc stats)
--------------------------------------------------
Artists:      6
Albums:      10
Songs:      157

Play Time:    0 days, 0:00:00
Uptime:       0 days, 0:22:15
DB Updated:   Mon Mar 20 09:20:01 2017
DB Play Time: 0 days, 20:07:36

###### mpd version ######
Music Player Daemon 0.19.19-dsd

Copyright (C) 2003-2007 Warren Dukes
Copyright (C) 2008-2014 Max Kellermann
This is free software; see the source for copying conditions.  There is NO
warranty; not even MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.


Database plugins:
 simple proxy upnp

Storage plugins:
 local smbclient nfs

Neighbor plugins:
 smbclient upnp

Decoders plugins:
 [mad] mp3 mp2
 [vorbis] ogg oga
 [oggflac] ogg oga
 [flac] flac
 [sndfile] wav aiff aif au snd paf iff svx sf voc w64 pvf xi htk caf sd2
 [audiofile] wav au aiff aif
 [dsdiff] dff
 [dsf] dsf
 [faad] aac
 [ffmpeg] 16sv 3g2 3gp 4xm 8svx aa3 aac ac3 afc aif aifc aiff al alaw amr anim apc ape asf atrac au aud avi avm2 avs bap bfi c93 cak cin cmv cpk daud dct divx dts dv dvd dxa eac3 film flac flc fli fll flx flv g726 gsm gxf iss m1v m2v m2t m2ts m4a m4b m4v mad mj2 mjpeg mjpg mka mkv mlp mm mmf mov mp+ mp1 mp2 mp3 mp4 mpc mpeg mpg mpga mpp mpu mve mvi mxf nc nsv nut nuv oga ogm ogv ogx oma ogg omg opus psp pva qcp qt r3d ra ram rl2 rm rmvb roq rpl rvc shn smk snd sol son spx str swf tak tgi tgq tgv thp ts tsp tta xa xvid uv uv2 vb vid vob voc vp6 vmd wav webm wma wmv wsaud wsvga wv wve
 [pcm]

Output plugins:
 null fifo pipe alsa jack httpd

Encoder plugins:
 null vorbis wave flac

Input plugins:
 file alsa curl ffmpeg smbclient nfs mms

Playlist plugins:
 extm3u m3u pls xspf asx rss soundcloud cue embcue

Protocols:
 file:// http:// https:// mms:// mmsh:// mmst:// mmsu:// gopher:// rtp:// rtsp:// rtmp:// rtmpt:// rtmps:// smb:// nfs:// alsa://

###### mpd.conf ######
###################################
# Auto generated mpd.conf file
# please DO NOT edit it manually!
# Use RuneUI MPD config section
###################################

log_level   "default"
log_file   "/var/log/runeaudio/mpd.log"
state_file   "/var/lib/mpd/mpdstate"
zeroconf_enabled    "yes"
zeroconf_name    "runeaudio"
bind_to_address "/run/mpd.sock"
bind_to_address    "any"
port    "6600"
max_connections    "20"
user    "mpd"
group    "audio"
db_file    "/var/lib/mpd/mpd.db"
sticker_file    "/var/lib/mpd/sticker.sql"
pid_file    "/var/run/mpd/pid"
music_directory    "/mnt/MPD"
playlist_directory    "/var/lib/mpd/playlists"
follow_outside_symlinks    "yes"
follow_inside_symlinks    "yes"
auto_update    "no"
filesystem_charset    "UTF-8"
id3v1_encoding    "UTF-8"
volume_normalization    "no"
audio_buffer_size    "4096"
buffer_before_play    "20%"
gapless_mp3_playback    "yes"
mixer_type    "disabled"

input {
   plugin    "curl"
}

decoder {
   plugin    "ffmpeg"
   enabled "yes"
}
replaygain    "off"

audio_output {
   name       "snd_rpi_hifiberry_dacplus"
   type       "alsa"
   device       "hw:1,0"
   auto_resample    "no"
   auto_format    "no"
   enabled    "yes"
}

audio_output {
   name       "bcm2835 ALSA_1"
   type       "alsa"
   device       "hw:0,0"
   auto_resample    "no"
   auto_format    "no"
}

audio_output {
   name       "bcm2835 ALSA_2"
   type       "alsa"
   device       "hw:0,0"
   auto_resample    "no"
   auto_format    "no"
}


###### Kernel optimization parameters ######
hardware platform:   RaspberryPi2
current orionprofile:   RuneAudio


kernel scheduler for mmcblk0:         [noop] deadline cfq
/proc/sys/vm/swappiness:         0
/proc/sys/kernel/sched_latency_ns:      4500000
/proc/sys/kernel/sched_rt_period_us:      1000000
/proc/sys/kernel/sched_rt_runtime_us:      950000
/proc/sys/kernel/sched_autogroup_enabled:   1
/proc/sys/kernel/sched_rr_timeslice_ms:      10
/proc/sys/kernel/sched_min_granularity_ns:   2250000
/proc/sys/kernel/sched_wakeup_granularity_ns:   3000000


###### Kernel module snd_usb_audio settings ######
Error opening module snd_usb_audio

###### Systemd active startup scripts (ls -lah /etc/systemd/system/multi-user.target.wants/) ######
total 8.0K
drwxr-xr-x 2 root root 4.0K Mar 20 00:32 .
drwxr-xr-x 6 root root 4.0K Dec 15 13:47 ..
lrwxrwxrwx 1 root root   44 Jan 29 06:51 amixer-webui.service -> /usr/lib/systemd/system/amixer-webui.service
lrwxrwxrwx 1 root root   44 Feb 14  2015 avahi-daemon.service -> /usr/lib/systemd/system/avahi-daemon.service
lrwxrwxrwx 1 root root   39 Feb  8  2015 haveged.service -> /usr/lib/systemd/system/haveged.service
lrwxrwxrwx 1 root root   44 Mar 11  2016 mpd-watchdog.service -> /usr/lib/systemd/system/mpd-watchdog.service
lrwxrwxrwx 1 root root   44 Mar 20 00:32 netctl-auto@wlan0.service -> /usr/lib/systemd/system/netctl-auto@.service
lrwxrwxrwx 1 root root   47 Oct 19 11:38 netctl-ifplugd@eth0.service -> /usr/lib/systemd/system/netctl-ifplugd@.service
lrwxrwxrwx 1 root root   37 Feb 14  2015 nginx.service -> /usr/lib/systemd/system/nginx.service
lrwxrwxrwx 1 root root   36 Feb 14  2015 ntpd.service -> /usr/lib/systemd/system/ntpd.service
lrwxrwxrwx 1 root root   39 Feb 14  2015 php-fpm.service -> /usr/lib/systemd/system/php-fpm.service
lrwxrwxrwx 1 root root   37 Feb 14  2015 redis.service -> /usr/lib/systemd/system/redis.service
lrwxrwxrwx 1 root root   40 Mar 19  2016 remote-fs.target -> /usr/lib/systemd/system/remote-fs.target
lrwxrwxrwx 1 root root   43 Feb 14  2015 rune_PL_wrk.service -> /usr/lib/systemd/system/rune_PL_wrk.service
lrwxrwxrwx 1 root root   45 Feb 14  2015 rune_shutdown.service -> /usr/lib/systemd/system/rune_shutdown.service
lrwxrwxrwx 1 root root   43 Feb 14  2015 rune_SY_wrk.service -> /usr/lib/systemd/system/rune_SY_wrk.service
lrwxrwxrwx 1 root root   36 Feb  8  2015 sshd.service -> /usr/lib/systemd/system/sshd.service


###### Filesystem mounts ######
/dev/root / ext4 rw,relatime,data=ordered 0 0
devtmpfs /dev devtmpfs rw,relatime,size=468032k,nr_inodes=117008,mode=755 0 0
sysfs /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0
proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0
securityfs /sys/kernel/security securityfs rw,nosuid,nodev,noexec,relatime 0 0
tmpfs /dev/shm tmpfs rw,nosuid,nodev 0 0
devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0
tmpfs /run tmpfs rw,nosuid,nodev,mode=755 0 0
tmpfs /sys/fs/cgroup tmpfs ro,nosuid,nodev,noexec,mode=755 0 0
cgroup /sys/fs/cgroup/systemd cgroup rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/usr/lib/systemd/systemd-cgroups-agent,name=systemd 0 0
cgroup /sys/fs/cgroup/pids cgroup rw,nosuid,nodev,noexec,relatime,pids 0 0
cgroup /sys/fs/cgroup/memory cgroup rw,nosuid,nodev,noexec,relatime,memory 0 0
cgroup /sys/fs/cgroup/cpu,cpuacct cgroup rw,nosuid,nodev,noexec,relatime,cpu,cpuacct 0 0
cgroup /sys/fs/cgroup/perf_event cgroup rw,nosuid,nodev,noexec,relatime,perf_event 0 0
cgroup /sys/fs/cgroup/devices cgroup rw,nosuid,nodev,noexec,relatime,devices 0 0
cgroup /sys/fs/cgroup/freezer cgroup rw,nosuid,nodev,noexec,relatime,freezer 0 0
cgroup /sys/fs/cgroup/net_cls,net_prio cgroup rw,nosuid,nodev,noexec,relatime,net_cls,net_prio 0 0
cgroup /sys/fs/cgroup/blkio cgroup rw,nosuid,nodev,noexec,relatime,blkio 0 0
systemd-1 /proc/sys/fs/binfmt_misc autofs rw,relatime,fd=31,pgrp=1,timeout=0,minproto=5,maxproto=5,direct 0 0
debugfs /sys/kernel/debug debugfs rw,relatime 0 0
tmpfs /tmp tmpfs rw 0 0
mqueue /dev/mqueue mqueue rw,relatime 0 0
configfs /sys/kernel/config configfs rw,relatime 0 0
logs /var/log tmpfs rw,nosuid,nodev,noatime,size=5120k 0 0
rune-logs /var/log/runeaudio tmpfs rw,nosuid,nodev,noatime,size=5120k 0 0
/dev/mmcblk0p1 /boot vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro 0 0
/dev/sda1 /mnt/MPD/USB/GGG vfat rw,nosuid,nodev,noexec,noatime,uid=1000,gid=92,fmask=0022,dmask=0022,codepage=437,iocharset=utf8,shortname=mixed,errors=remount-ro 0 0
//192.168.1.84/Music /mnt/MPD/NAS/Steves\040Computer cifs ro,relatime,vers=1.0,sec=ntlmssp,cache=none,username=stephendrake,domain=MACBOOK-PRO,uid=1000,forceuid,gid=92,forcegid,addr=192.168.1.84,file_mode=0755,dir_mode=0755,nounix,mapposix,rsize=16384,wsize=17408,actimeo=1 0 0


###### Filesystem mounts - free space (df -h) ######
Filesystem            Size  Used Avail Use% Mounted on
/dev/root             1.9G  1.7G  100M  95% /
devtmpfs              458M     0  458M   0% /dev
tmpfs                 462M     0  462M   0% /dev/shm
tmpfs                 462M   12M  450M   3% /run
tmpfs                 462M     0  462M   0% /sys/fs/cgroup
tmpfs                 462M  4.0K  462M   1% /tmp
logs                  5.0M   20K  5.0M   1% /var/log
rune-logs             5.0M   48K  5.0M   1% /var/log/runeaudio
/dev/mmcblk0p1        100M   19M   81M  19% /boot
/dev/sda1              15G  4.8G  9.8G  33% /mnt/MPD/USB/GGG
//192.168.1.84/Music  848G  685G  163G  81% /mnt/MPD/NAS/Steves Computer


###### Loaded kernel modules ######
Module                  Size  Used by
arc4                    1936  0
md4                     3599  0
nls_utf8                1419  2
cifs                  392255  2
brcmfmac              184455  0
brcmutil                8379  1 brcmfmac
cfg80211              498228  1 brcmfmac
snd_soc_pcm512x_i2c     2609  1
snd_soc_hifiberry_dacplus     4587  0
snd_soc_pcm512x        18826  1 snd_soc_pcm512x_i2c
snd_soc_bcm2835_i2s     6278  2
snd_soc_hifiberry_dac     2887  0
snd_soc_core          153224  4 snd_soc_pcm512x,snd_soc_bcm2835_i2s,snd_soc_hifiberry_dac,snd_soc_hifiberry_dacplus
snd_bcm2835            21181  0
regmap_i2c              3560  1 snd_soc_pcm512x_i2c
snd_pcm_dmaengine       5503  1 snd_soc_core
snd_pcm                88980  6 snd_bcm2835,snd_soc_pcm512x,snd_soc_core,snd_soc_hifiberry_dac,snd_pcm_dmaengine,snd_soc_hifiberry_dacplus
snd_timer              22172  1 snd_pcm
snd                    63333  4 snd_bcm2835,snd_soc_core,snd_timer,snd_pcm
bcm2835_rng             2167  0
i2c_bcm2708             5382  0
rng_core                8183  1 bcm2835_rng
bcm2835_gpiomem         3638  0
bcm2835_wdt             3756  0
clk_hifiberry_dacpro     2557  1
uio_pdrv_genirq         3539  0
uio                     9114  1 uio_pdrv_genirq
sch_fq_codel            8174  3
ip_tables              12147  0
x_tables               18169  1 ip_tables
ipv6                  372060  0


###### Network listening sockets (netstat -lnp) ######
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       PID/Program name
tcp        0      0 0.0.0.0:6600            0.0.0.0:*               LISTEN      492/mpd
tcp        0      0 0.0.0.0:5002            0.0.0.0:*               LISTEN      502/shairport
tcp        0      0 127.0.0.1:6379          0.0.0.0:*               LISTEN      356/redis-server 12
tcp        0      0 0.0.0.0:8080            0.0.0.0:*               LISTEN      306/python
tcp        0      0 0.0.0.0:80              0.0.0.0:*               LISTEN      371/nginx: master p
tcp        0      0 0.0.0.0:81              0.0.0.0:*               LISTEN      371/nginx: master p
tcp        0      0 0.0.0.0:82              0.0.0.0:*               LISTEN      371/nginx: master p
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      342/sshd
udp        0      0 0.0.0.0:45591           0.0.0.0:*                           304/avahi-daemon: r
udp        0      0 0.0.0.0:68              0.0.0.0:*                           642/dhcpcd
udp        0      0 192.168.1.149:123       0.0.0.0:*                           360/ntpd
udp        0      0 127.0.0.1:123           0.0.0.0:*                           360/ntpd
udp        0      0 0.0.0.0:123             0.0.0.0:*                           360/ntpd
udp        0      0 192.168.1.255:137       0.0.0.0:*                           446/nmbd
udp        0      0 192.168.1.149:137       0.0.0.0:*                           446/nmbd
udp        0      0 0.0.0.0:137             0.0.0.0:*                           446/nmbd
udp        0      0 192.168.1.255:138       0.0.0.0:*                           446/nmbd
udp        0      0 192.168.1.149:138       0.0.0.0:*                           446/nmbd
udp        0      0 0.0.0.0:138             0.0.0.0:*                           446/nmbd
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           304/avahi-daemon: r
Active UNIX domain sockets (only servers)
Proto RefCnt Flags       Type       State         I-Node   PID/Program name     Path
unix  2      [ ACC ]     STREAM     LISTENING     13822    553/php-fpm: master  /var/run/php-command.sock
unix  2      [ ACC ]     STREAM     LISTENING     12035    601/Xorg             /tmp/.X11-unix/X0
unix  2      [ ACC ]     STREAM     LISTENING     12034    601/Xorg             @/tmp/.X11-unix/X0
unix  2      [ ACC ]     STREAM     LISTENING     12354    356/redis-server 12  /tmp/redis.sock
unix  2      [ ACC ]     STREAM     LISTENING     15333    958/dbus-daemon      @/tmp/dbus-K74f1Zzlwv
unix  2      [ ACC ]     STREAM     LISTENING     1698     1/init               /var/run/avahi-daemon/socket
unix  2      [ ACC ]     STREAM     LISTENING     1701     1/init               /run/dbus/system_bus_socket
unix  2      [ ACC ]     STREAM     LISTENING     1704     1/init               /var/run/rpcbind.sock
unix  2      [ ACC ]     STREAM     LISTENING     14002    446/nmbd             /var/run/samba/nmbd/unexpected
unix  2      [ ACC ]     STREAM     LISTENING     12765    492/mpd              /run/mpd.sock
unix  2      [ ACC ]     STREAM     LISTENING     8417     1/init               /run/systemd/private
unix  2      [ ACC ]     STREAM     LISTENING     13256    965/dbus-daemon      @/tmp/dbus-IjPNHxzATX
unix  2      [ ACC ]     SEQPACKET  LISTENING     8424     1/init               /run/systemd/coredump
unix  2      [ ACC ]     SEQPACKET  LISTENING     8427     1/init               /run/udev/control
unix  2      [ ACC ]     STREAM     LISTENING     13816    553/php-fpm: master  /var/run/php-display.sock
unix  2      [ ACC ]     STREAM     LISTENING     13819    553/php-fpm: master  /var/run/php-db.sock
unix  2      [ ACC ]     STREAM     LISTENING     8446     1/init               /run/systemd/journal/stdout


###### Network established sockets (netstat -np) ######
Active Internet connections (w/o servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       PID/Program name
tcp        0      0 127.0.0.1:38596         127.0.0.1:6379          TIME_WAIT   -
tcp        0      0 127.0.0.1:38660         127.0.0.1:6379          TIME_WAIT   -
tcp        0      0 127.0.0.1:38602         127.0.0.1:6379          TIME_WAIT   -
tcp        0      0 127.0.0.1:38612         127.0.0.1:6379          TIME_WAIT   -
tcp        0      0 127.0.0.1:6379          127.0.0.1:38744         ESTABLISHED 356/redis-server 12
tcp        0      0 127.0.0.1:38674         127.0.0.1:6379          TIME_WAIT   -
tcp        0      0 127.0.0.1:38542         127.0.0.1:6379          TIME_WAIT   -
tcp        0      0 127.0.0.1:38730         127.0.0.1:6379          TIME_WAIT   -
tcp        0      0 127.0.0.1:38606         127.0.0.1:6379          TIME_WAIT   -
tcp        0      0 127.0.0.1:38684         127.0.0.1:6379          TIME_WAIT   -
tcp        0      0 127.0.0.1:39738         127.0.0.1:6600          TIME_WAIT   -


(some stuff deleted here because I had too many characters)



###### Kernel status (dmesg) ######
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.39-ARCH+ (frank@franks-ubuntu) (gcc version 4.8.3 20140106 (prerelease) (crosstool-NG linaro-1.13.1-4.8-2014.01 - Linaro GCC 2013.11) ) #5 SMP Sat Feb 11 15:43:36 CET 2017
[    0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2
[    0.000000] cma: Reserved 8 MiB at 0x3a800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 241664
[    0.000000] free_area_init_node: node 0, pgdat 80ba3e80, node_mem_map b9fa6000
[    0.000000]   Normal zone: 2124 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 241664 pages, LIFO batch:31
[    0.000000] [bcm2709_smp_init_cpus] enter (9460->f3003010)
[    0.000000] [bcm2709_smp_init_cpus] ncores=4
[    0.000000] PERCPU: Embedded 13 pages/cpu @b9f61000 s22656 r8192 d22400 u53248
[    0.000000] pcpu-alloc: s22656 r8192 d22400 u53248 alloc=13*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 239540
[    0.000000] Kernel command line: 8250.nr_uarts=0 dma.dmachans=0x7f35 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2709.boardrev=0xa02082 bcm2709.serial=0x50ae8a1d smsc95xx.macaddr=B8:27:EB:AE:8A:1D bcm2708_fb.fbswap=1 bcm2709.uart_clock=48000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000  root=/dev/mmcblk0p2 rw rootwait rootfstype=ext4 selinux=0 plymouth.enable=0 smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0 dwc_otg.fiq_enable=1 dwc_otg.fiq_fsm_enable=1 dwc_otg.fiq_fsm_mask=0x3 elevator=noop ipv6.disable=1 logo.nologo quiet loglevel=3 rd.systemd.show_status=false rd.udev.log-priority=3
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 936068K/966656K available (8027K kernel code, 578K rwdata, 2900K rodata, 440K init, 797K bss, 22396K reserved, 8192K cma-reserved)
[    0.000000] Virtual kernel memory layout:
                   vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                   fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
                   vmalloc : 0xbb800000 - 0xff800000   (1088 MB)
                   lowmem  : 0x80000000 - 0xbb000000   ( 944 MB)
                   modules : 0x7f000000 - 0x80000000   (  16 MB)
                     .text : 0x80008000 - 0x80ab3f68   (10928 kB)
                     .init : 0x80ab4000 - 0x80b22000   ( 440 kB)
                     .data : 0x80b22000 - 0x80bb2bd8   ( 579 kB)
                      .bss : 0x80bb5000 - 0x80c7c428   ( 798 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]    Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] Architected cp15 timer(s) running at 19.20MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000014] Switching to timer-based delay loop, resolution 52ns
[    0.000150] Console: colour dummy device 80x30
[    0.000238] console [tty0] enabled
[    0.000255] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[    0.000264] pid_max: default: 32768 minimum: 301
[    0.000416] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000422] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000912] Disabling cpuset control group subsystem
[    0.000931] Initializing cgroup subsys io
[    0.000945] Initializing cgroup subsys memory
[    0.000968] Initializing cgroup subsys devices
[    0.000976] Initializing cgroup subsys freezer
[    0.000986] Initializing cgroup subsys net_cls
[    0.000994] Initializing cgroup subsys perf_event
[    0.001001] Initializing cgroup subsys net_prio
[    0.001015] Initializing cgroup subsys pids
[    0.001037] CPU: Testing write buffer coherency: ok
[    0.001330] CPU0: update cpu_capacity 1024
[    0.001335] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.001341] [bcm2709_smp_prepare_cpus] enter
[    0.001413] Setting up static identity map for 0x8240 - 0x8274
[    0.002284] [bcm2709_boot_secondary] cpu:1 started (0) 18
[    0.002497] [bcm2709_secondary_init] enter cpu:1
[    0.002522] CPU1: update cpu_capacity 1024
[    0.002525] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.002730] [bcm2709_boot_secondary] cpu:2 started (0) 17
[    0.002867] [bcm2709_secondary_init] enter cpu:2
[    0.002877] CPU2: update cpu_capacity 1024
[    0.002880] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.003056] [bcm2709_boot_secondary] cpu:3 started (0) 18
[    0.003182] [bcm2709_secondary_init] enter cpu:3
[    0.003192] CPU3: update cpu_capacity 1024
[    0.003195] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.003224] Brought up 4 CPUs
[    0.003235] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[    0.003239] CPU: All CPU(s) started in HYP mode.
[    0.003242] CPU: Virtualization extensions available.
[    0.003598] devtmpfs: initialized
[    0.008921] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[    0.009095] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.009383] xor: measuring software checksum speed
[    0.099967]    arm4regs  :  2046.800 MB/sec
[    0.199998]    8regs     :  1198.800 MB/sec
[    0.300033]    32regs    :  1032.400 MB/sec
[    0.400064]    neon      :  2092.400 MB/sec
[    0.400069] xor: using function: neon (2092.400 MB/sec)
[    0.400137] pinctrl core: initialized pinctrl subsystem
[    0.400425] NET: Registered protocol family 16
[    0.403611] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[    0.407074] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.407079] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.407154] Serial: AMBA PL011 UART driver
[    0.407222] uart-pl011 3f201000.uart: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[    0.407302] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[    0.620274] raid6: int32x1  gen()   182 MB/s
[    0.790322] raid6: int32x1  xor()   168 MB/s
[    0.960425] raid6: int32x2  gen()   279 MB/s
[    1.130470] raid6: int32x2  xor()   214 MB/s
[    1.300584] raid6: int32x4  gen()   301 MB/s
[    1.470722] raid6: int32x4  xor()   225 MB/s
[    1.640776] raid6: int32x8  gen()   303 MB/s
[    1.810847] raid6: int32x8  xor()   206 MB/s
[    1.980910] raid6: neonx1   gen()   751 MB/s
[    2.151017] raid6: neonx1   xor()   724 MB/s
[    2.321104] raid6: neonx2   gen()  1081 MB/s
[    2.491180] raid6: neonx2   xor()   956 MB/s
[    2.661246] raid6: neonx4   gen()  1463 MB/s
[    2.831331] raid6: neonx4   xor()  1105 MB/s
[    3.001410] raid6: neonx8   gen()  1019 MB/s
[    3.171495] raid6: neonx8   xor()   840 MB/s
[    3.171499] raid6: using algorithm neonx4 gen() 1463 MB/s
[    3.171503] raid6: .... xor() 1105 MB/s, rmw enabled
[    3.171507] raid6: using intx1 recovery algorithm
[    3.172290] bcm2835-dma 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0x1
[    3.172562] SCSI subsystem initialized
[    3.172710] usbcore: registered new interface driver usbfs
[    3.172746] usbcore: registered new interface driver hub
[    3.172809] usbcore: registered new device driver usb
[    3.181519] raspberrypi-firmware soc:firmware: Attached to firmware from 2016-12-09 15:11
[    3.208077] clocksource: Switched to clocksource arch_sys_counter
[    3.236093] FS-Cache: Loaded
[    3.236236] CacheFiles: Loaded
[    3.241718] NET: Registered protocol family 2
[    3.242143] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    3.242200] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    3.242295] TCP: Hash tables configured (established 8192 bind 8192)
[    3.242351] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    3.242374] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    3.242489] NET: Registered protocol family 1
[    3.242655] RPC: Registered named UNIX socket transport module.
[    3.242659] RPC: Registered udp transport module.
[    3.242663] RPC: Registered tcp transport module.
[    3.242667] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    3.243347] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[    3.244644] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    3.250979] VFS: Disk quotas dquot_6.6.0
[    3.251113] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    3.252333] FS-Cache: Netfs 'nfs' registered for caching
[    3.252719] NFS: Registering the id_resolver key type
[    3.252750] Key type id_resolver registered
[    3.252755] Key type id_legacy registered
[    3.252770] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    3.253168] JFS: nTxBlock = 7377, nTxLock = 59016
[    3.257710] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[    3.261578] async_tx: api initialized (async)
[    3.261726] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    3.261792] io scheduler noop registered (default)
[    3.261801] io scheduler deadline registered
[    3.261827] io scheduler cfq registered
[    3.263069] BCM2708FB: allocated DMA memory fac10000
[    3.263083] BCM2708FB: allocated DMA channel 0 @ f3007000
[    3.268338] Console: switching to colour frame buffer device 82x26
[    3.271273] vc-cma: Videocore CMA driver
[    3.271278] vc-cma: vc_cma_base      = 0x00000000
[    3.271282] vc-cma: vc_cma_size      = 0x00000000 (0 MiB)
[    3.271286] vc-cma: vc_cma_initial   = 0x00000000 (0 MiB)
[    3.271372] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
[    3.278297] brd: module loaded
[    3.282431] loop: module loaded
[    3.282925] vchiq: vchiq_init_state: slot_zero = 0xbac80000, is_master = 0
[    3.283907] Loading iSCSI transport class v2.0-870.
[    3.284270] usbcore: registered new interface driver ax88179_178a
[    3.284317] usbcore: registered new interface driver smsc95xx
[    3.284379] usbcore: registered new interface driver cdc_ncm
[    3.284389] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    3.484525] Core Release: 2.80a
[    3.484531] Setting default values for core params
[    3.484550] Finished setting default values for core params
[    3.684716] Using Buffer DMA mode
[    3.684721] Periodic Transfer Interrupt Enhancement - disabled
[    3.684724] Multiprocessor Interrupt Enhancement - disabled
[    3.684728] OTG VER PARAM: 0, OTG VER FLAG: 0
[    3.684752] Dedicated Tx FIFOs mode
[    3.684936] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xbac04000 dma = 0xfac04000 len=9024
[    3.684951] FIQ FSM acceleration enabled for :
               Non-periodic Split Transactions
               Periodic Split Transactions
[    3.684960] dwc_otg: Microframe scheduler enabled
[    3.684981] WARN::hcd_init_fiq:413: FIQ on core 1 at 0x805d4318
[    3.684987] WARN::hcd_init_fiq:414: FIQ ASM at 0x805d4660 length 36
[    3.684993] WARN::hcd_init_fiq:439: MPHI regs_base at 0xbbc7c000
[    3.685023] dwc_otg 3f980000.usb: DWC OTG Controller
[    3.685041] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[    3.685060] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[    3.685095] Init: Port Power? op_state=1
[    3.685099] Init: Power Port (0)
[    3.685199] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.685206] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.685212] usb usb1: Product: DWC OTG Controller
[    3.685217] usb usb1: Manufacturer: Linux 4.4.39-ARCH+ dwc_otg_hcd
[    3.685222] usb usb1: SerialNumber: 3f980000.usb
[    3.685594] hub 1-0:1.0: USB hub found
[    3.685613] hub 1-0:1.0: 1 port detected
[    3.685913] dwc_otg: FIQ enabled
[    3.685917] dwc_otg: NAK holdoff enabled
[    3.685921] dwc_otg: FIQ split-transaction FSM enabled
[    3.685938] Module dwc_common_port init
[    3.686052] usbcore: registered new interface driver usb-storage
[    3.686086] usbcore: registered new interface driver ums-alauda
[    3.686115] usbcore: registered new interface driver ums-cypress
[    3.686144] usbcore: registered new interface driver ums-datafab
[    3.686173] usbcore: registered new interface driver ums_eneub6250
[    3.686202] usbcore: registered new interface driver ums-freecom
[    3.686235] usbcore: registered new interface driver ums-isd200
[    3.686267] usbcore: registered new interface driver ums-jumpshot
[    3.686297] usbcore: registered new interface driver ums-karma
[    3.686327] usbcore: registered new interface driver ums-onetouch
[    3.686368] usbcore: registered new interface driver ums-realtek
[    3.686398] usbcore: registered new interface driver ums-sddr09
[    3.686428] usbcore: registered new interface driver ums-sddr55
[    3.686457] usbcore: registered new interface driver ums-usbat
[    3.686585] mousedev: PS/2 mouse device common for all mice
[    3.686944] md: linear personality registered for level -1
[    3.686953] md: raid0 personality registered for level 0
[    3.686961] md: raid1 personality registered for level 1
[    3.686968] md: raid10 personality registered for level 10
[    3.687082] md: raid6 personality registered for level 6
[    3.687087] md: raid5 personality registered for level 5
[    3.687091] md: raid4 personality registered for level 4
[    3.687100] md: multipath personality registered for level -4
[    3.687108] md: faulty personality registered for level -5
[    3.687276] device-mapper: uevent: version 1.0.3
[    3.687497] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    3.687774] device-mapper: multipath: version 1.10.0 loaded
[    3.687785] device-mapper: multipath round-robin: version 1.0.0 loaded
[    3.687793] device-mapper: multipath queue-length: version 0.1.0 loaded
[    3.687801] device-mapper: multipath service-time: version 0.2.0 loaded
[    3.687820] device-mapper: raid: Loading target version 1.7.0
[    3.687918] bcm2835-cpufreq: min=1200000 max=1200000
[    3.688152] sdhci: Secure Digital Host Controller Interface driver
[    3.688156] sdhci: Copyright(c) Pierre Ossman
[    3.688327] sdhost: log_buf @ bac07000 (fac07000)
[    3.748092] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[    3.750134] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[    3.750140] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[    3.788137] sdhci-pltfm: SDHCI platform and OF driver helper
[    3.788344] ledtrig-cpu: registered to indicate activity on CPUs
[    3.788420] hidraw: raw HID events driver (C) Jiri Kosina
[    3.788621] usbcore: registered new interface driver usbhid
[    3.788625] usbhid: USB HID core driver
[    3.788895] Initializing XFRM netlink socket
[    3.788912] NET: Registered protocol family 17
[    3.788987] Key type dns_resolver registered
[    3.789386] Registering SWP/SWPB emulation handler
[    3.789759] registered taskstats version 1
[    3.791406] Btrfs loaded
[    3.791975] Key type encrypted registered
[    3.792022] vc-sm: Videocore shared memory driver
[    3.792028] [vc_sm_connected_init]: start
[    3.792301] [vc_sm_connected_init]: end - returning 0
[    3.793399] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[    3.793573] of_cfs_init
[    3.793616] of_cfs_init: OK
[    3.793983] md: Waiting for all devices to be available before autodetect
[    3.793988] md: If you don't use raid, use raid=noautodetect
[    3.794507] md: Autodetecting RAID arrays.
[    3.794512] md: Scanned 0 and added 0 devices.
[    3.794515] md: autorun ...
[    3.794518] md: ... autorun DONE.
[    3.794593] Waiting for root device /dev/mmcblk0p2...
[    3.847453] mmc0: host does not support reading read-only switch, assuming write-enable
[    3.850706] mmc0: new high speed SDHC card at address aaaa
[    3.850982] mmcblk0: mmc0:aaaa SL32G 29.7 GiB
[    3.852238]  mmcblk0: p1 p2
[    3.869148] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    3.870636] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    3.872124] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    3.874796] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    3.878136] Indeed it is in host mode hprt0 = 00021501
[    3.960485] mmc1: new high speed SDIO card at address 0001
[    4.058095] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    4.058173] Indeed it is in host mode hprt0 = 00001101
[    4.258220] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[    4.258227] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.258632] hub 1-1:1.0: USB hub found
[    4.258675] hub 1-1:1.0: 5 ports detected
[    4.340224] EXT4-fs (mmcblk0p2): recovery complete
[    4.344988] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    4.345016] VFS: Mounted root (ext4 filesystem) on device 179:2.
[    4.345845] devtmpfs: mounted
[    4.346171] Freeing unused kernel memory: 440K (80ab4000 - 80b22000)
[    4.538102] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    4.638230] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[    4.638243] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.640699] smsc95xx v1.0.4
[    4.663306] systemd[1]: System time before build time, advancing clock.
[    4.699646] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:ae:8a:1d
[    4.759302] IPv6: Loaded, but administratively disabled, reboot required to enable
[    4.768329] ip_tables: (C) 2000-2006 Netfilter Core Team
[    4.772232] random: systemd: uninitialized urandom read (16 bytes read, 76 bits of entropy available)
[    4.782745] random: systemd: uninitialized urandom read (16 bytes read, 76 bits of entropy available)
[    4.784364] systemd[1]: systemd 229 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    4.784651] systemd[1]: Detected architecture arm.
[    4.785559] systemd[1]: Set hostname to .
[    4.871704] random: systemd-cryptse: uninitialized urandom read (16 bytes read, 77 bits of entropy available)
[    4.873590] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 77 bits of entropy available)
[    4.873712] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 77 bits of entropy available)
[    4.962108] random: systemd: uninitialized urandom read (16 bytes read, 78 bits of entropy available)
[    4.962274] random: systemd: uninitialized urandom read (16 bytes read, 78 bits of entropy available)
[    4.962563] random: systemd: uninitialized urandom read (16 bytes read, 78 bits of entropy available)
[    4.963096] random: systemd: uninitialized urandom read (16 bytes read, 78 bits of entropy available)
[    4.982334] random: systemd: uninitialized urandom read (16 bytes read, 78 bits of entropy available)
[    5.278380] systemd[1]: Listening on Process Core Dump Socket.
[    5.278520] systemd[1]: Reached target Remote File Systems.
[    5.278566] systemd[1]: Reached target System Time Synchronized.
[    5.278686] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.278813] systemd[1]: Listening on udev Control Socket.
[    5.278918] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    5.279016] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    5.279139] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    5.279192] systemd[1]: Reached target Paths.
[    5.279234] systemd[1]: Reached target Swap.
[    5.279277] systemd[1]: Reached target Login Prompts.
[    5.279377] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.279745] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.279844] systemd[1]: Listening on udev Kernel Socket.
[    5.279891] systemd[1]: Reached target Encrypted Volumes.
[    5.280008] systemd[1]: Listening on Journal Socket.
[    5.298680] systemd[1]: Created slice System Slice.
[    5.358260] systemd[1]: Mounting Temporary Directory...
[    5.359918] systemd[1]: Starting Remount Root and Kernel File Systems...
[    5.361841] systemd[1]: Mounting POSIX Message Queue File System...
[    5.363720] systemd[1]: Starting Journal Service...
[    5.428486] systemd[1]: Starting RuneAudio shutdown script...
[    5.430134] systemd[1]: Mounting Debug File System...
[    5.459722] systemd[1]: Starting Load Kernel Modules...
[    5.460340] systemd[1]: Created slice system-netctl\x2difplugd.slice.
[    5.460524] usb 1-1.5: new high-speed USB device number 4 using dwc_otg
[    5.473126] systemd[1]: Created slice system-netctl\x2dauto.slice.
[    5.474843] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    5.475016] systemd[1]: Reached target Slices.
[    5.477341] systemd[1]: Starting Setup Virtual Console...
[    5.484738] systemd[1]: Started Remount Root and Kernel File Systems.
[    5.485729] systemd[1]: Started RuneAudio shutdown script.
[    5.486725] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    5.487787] systemd[1]: Started Load Kernel Modules.
[    5.505071] systemd[1]: Mounted POSIX Message Queue File System.
[    5.505272] systemd[1]: Mounted Debug File System.
[    5.505355] systemd[1]: Mounted Temporary Directory.
[    5.549356] systemd[1]: Started Journal Service.
[    5.558962] usb 1-1.5: New USB device found, idVendor=0951, idProduct=1666
[    5.558976] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.558982] usb 1-1.5: Product: DataTraveler 3.0
[    5.558988] usb 1-1.5: Manufacturer: Kingston
[    5.558994] usb 1-1.5: SerialNumber: 60A44C3FAC2DAF70A0001274
[    5.559530] usb-storage 1-1.5:1.0: USB Mass Storage device detected
[    5.559877] scsi host0: usb-storage 1-1.5:1.0
[    6.195499] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[    6.211944] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[    6.228595] bcm2708_i2c 3f804000.i2c: BSC1 Controller at 0x3f804000 (irq 83) (baudrate 100000)
[    6.241026] bcm2835-rng 3f104000.rng: hwrng registered
[    6.408781] snd-rpi-hifiberry-dacplus soc:sound: ASoC: CODEC DAI pcm512x-hifi not registered
[    6.408794] snd-rpi-hifiberry-dacplus soc:sound: snd_soc_register_card() failed: -517
[    6.485335] snd-rpi-hifiberry-dacplus soc:sound: pcm512x-hifi <-> 3f203000.i2s mapping ok
[    6.558903] scsi 0:0:0:0: Direct-Access     KINGSTON DataTraveler 3.0 1.01 PQ: 0 ANSI: 6
[    6.559900] sd 0:0:0:0: [sda] 30375936 512-byte logical blocks: (15.6 GB/14.5 GiB)
[    6.561675] sd 0:0:0:0: [sda] Write Protect is off
[    6.561694] sd 0:0:0:0: [sda] Mode Sense: 2b 00 10 08
[    6.561879] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
[    6.563675]  sda: sda1
[    6.564736] sd 0:0:0:0: [sda] Attached SCSI removable disk
[    6.574055] usbcore: registered new interface driver brcmfmac
[    6.583037] random: nonblocking pool is initialized
[    6.641467] cfg80211: World regulatory domain updated:
[    6.641484] cfg80211:  DFS Master region: unset
[    6.641488] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    6.641496] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    6.641502] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    6.641508] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    6.641515] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    6.641522] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    6.641528] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    6.641533] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    6.641539] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    6.671048] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: May 27 2016 00:13:38 version 7.45.41.26 (r640327) FWID 01-df77e4a7
[    6.689760] cfg80211: Updating information on frequency 2412 MHz with regulatory rule:
[    6.689773] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[    6.689779] cfg80211: Updating information on frequency 2417 MHz with regulatory rule:
[    6.689785] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[    6.689790] cfg80211: Updating information on frequency 2422 MHz with regulatory rule:
[    6.689795] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[    6.689800] cfg80211: Updating information on frequency 2427 MHz with regulatory rule:
[    6.689805] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[    6.689809] cfg80211: Updating information on frequency 2432 MHz with regulatory rule:
[    6.689814] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[    6.689819] cfg80211: Updating information on frequency 2437 MHz with regulatory rule:
[    6.689824] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[    6.689829] cfg80211: Updating information on frequency 2442 MHz with regulatory rule:
[    6.689834] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[    6.689839] cfg80211: Updating information on frequency 2447 MHz with regulatory rule:
[    6.689844] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[    6.689848] cfg80211: Updating information on frequency 2452 MHz with regulatory rule:
[    6.689853] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[    6.689858] cfg80211: Updating information on frequency 2457 MHz with regulatory rule:
[    6.689863] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[    6.689868] cfg80211: Updating information on frequency 2462 MHz with regulatory rule:
[    6.689873] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[    6.689878] cfg80211: Updating information on frequency 2467 MHz with regulatory rule:
[    6.689883] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[    6.689887] cfg80211: Updating information on frequency 2472 MHz with regulatory rule:
[    6.689892] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[    6.689898] cfg80211: Updating information on frequency 2484 MHz with regulatory rule:
[    6.689902] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
[    6.690030] cfg80211: Ignoring regulatory request set by core since the driver uses its own custom regulatory domain
[    6.690037] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code
[    6.782042] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    7.489860] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[    7.894651] brcmfmac: brcmf_add_if: ERROR: netdev:wlan0 already exists
[    7.894671] brcmfmac: brcmf_add_if: ignore IF event
[    7.899201] brcmfmac: power management disabled
[    8.033863] brcmfmac: brcmf_add_if: ERROR: netdev:wlan0 already exists
[    8.033879] brcmfmac: brcmf_add_if: ignore IF event
[   13.789085] brcmfmac: power management disabled
[   14.079433] FS-Cache: Netfs 'cifs' registered for caching
[   14.079809] Key type cifs.spnego registered
[   14.079863] Key type cifs.idmap registered
[   14.093933] CIFS VFS: Error connecting to socket. Aborting operation.
[   14.094109] CIFS VFS: cifs_mount failed w/return code = -101
[   15.710042] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[   15.713313] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   66.728586] cfg80211: Verifying active interfaces after reg change

###### PHP backend ######
php version:   5.5.19
debug level:   0


Debug data collected in 1.249 seconds.   
sduck
 
Posts: 23
Joined: 18 Feb 2017, 04:18

Re: Settings not saving; getting logged out

Postby hondagx35 » 20 Mar 2017, 18:51

Hi sduck,

your debug data looks good so far.

This all sounds like you have network issues.
The internal wifi (RP3) isn't the best at all.
How far is your access point away from your Pi?

Frank
User avatar
hondagx35
 
Posts: 3042
Joined: 11 Sep 2014, 22:06
Location: Germany

Re: Settings not saving; getting logged out

Postby sduck » 20 Mar 2017, 19:13

Yes, I was thinking that it might be a wifi issue also. I have changed the channel my wifi is broadcasting on, to one that a neighbor isn't slightly interfering with. Also tried moving the device to a more exposed location. I'm one floor above the router/access point, almost directly above it, and am getting a strong signal according to the wifi set up page.

I also reinstalled the older version, v0.3-beta (23/03/2016). Still getting locked out.

I did notice in the status screen this -
Screen Shot 2017-03-20 at 1.01.36 PM.jpg
Screen Shot 2017-03-20 at 1.01.36 PM.jpg (53.1 KiB) Viewed 1633 times


I'm surprised that it's reporting a Raspberry Pi2, because as far as I know I have a 3B.
sduck
 
Posts: 23
Joined: 18 Feb 2017, 04:18

Re: Settings not saving; getting logged out

Postby hondagx35 » 20 Mar 2017, 21:44

Hi,

I'm surprised that it's reporting a Raspberry Pi2, because as far as I know I have a 3B.

Nothing to worry about.

Frank
User avatar
hondagx35
 
Posts: 3042
Joined: 11 Sep 2014, 22:06
Location: Germany

support RuneAudio Donate with PayPal

Next

Return to Raspberry Pi

Who is online

Users browsing this forum: No registered users and 8 guests