Runeui becomes unreachable

Raspberry Pi related support

Runeui becomes unreachable

Postby Jaymanator626 » 27 Feb 2017, 04:10

So here is my issue . I am running pi 3 headless through my amp and have a external drive hooked up . when I start the pi up and it finally boots to the runeui I can go to the ip on my android and load my library just fine . after about an hour when I open up the ui on my phone the site is unreachable but music is still playing . also I hooked up my screen to the pi so I could try to figure it out but the screen was just black ....but the music still plays.... Help?
Jaymanator626
 
Posts: 1
Joined: 27 Feb 2017, 04:01

Re: Runeui becomes unreachable

Postby hondagx35 » 27 Feb 2017, 11:45

Hi Jaymanator626,

also I hooked up my screen to the pi so I could try to figure it out but the screen was just black

You can not connect a monitor while the Pi is running.

Please try to connect via ssh to your Pi.

Use commands like:
Code: Select all
systemctl status

Code: Select all
journalctl

Code: Select all
dmesg

to see if there are any errors.

Frank

- Get access to the console:
Use SSH from your PC
    If you are not familiar with SSH read this for Windows or this for Linux/MacOS
    The default login for RuneAudio is "root" with the password "rune" (without quotes).

- Use sftp to access files on Rune Audio:
Get WinSCP from here and install it.
When it opens setup the following:
- Session
File Protocol: SCP
Host name: The IP address of you Raspberry Pi
User name: root
Password: rune

That's it, connect and you can transfer files just by dragging and dropping.

OSX: Try Cyberduck
User avatar
hondagx35
 
Posts: 3042
Joined: 11 Sep 2014, 22:06
Location: Germany

support RuneAudio Donate with PayPal


Return to Raspberry Pi

Who is online

Users browsing this forum: No registered users and 16 guests