RPI3 + Hifiberry Digi+ problem with setting up

Raspberry Pi related support

RPI3 + Hifiberry Digi+ problem with setting up

Postby TripleSec » 09 Apr 2017, 12:16

Hello everyone,

I am trying to set up Raspberry PI 3 + Hifiberry Digi+, but I can't get it to work.

I am using: RuneAudio_rpi2_rp3_0.4-beta_20160321_2GB.img

I followed the instrucions from hondax35 post from here: hifiberry-dac-not-detected-after-kernel-update-t4180.html

1) Firstly I resized partition
Before resizing it looks like this:
Image

Resizing:
Image

After resizing:
Image
Image

Is it done correctly?

2) Then I tried to update kernel and firmware, so I pasted to ssh console this:
pacman -Sy --force raspberrypi-firmware-bootloader linux-raspberrypi
and then this:
pacman -Sy --force raspberrypi-firmware raspberrypi-bootloader linux-raspberrypi

Image

Is it done correctly?

3) I then edited config.txt (I didn't touch "config.txt.pacnew")
*uncommented: dtoverlay=hifiberry-digi
*added line below: dtparam=audio=on

4) Deleted the file /etc/modules-load.d/ras....conf using ssh

5) Changed the kernel name

Image

___________
After inserting Hifiberry digi+ card I can't connect to runeaudio.
What can be done in this case?


Debug file copied before inserting Hifiberry digi+: https://pastebin.com/bE1ryvpX
Edited config.txt: https://pastebin.com/PaBsQjXX
config.txt.pacnew: https://pastebin.com/7pX7mhn0
Last edited by TripleSec on 09 Apr 2017, 12:21, edited 1 time in total.
TripleSec
 
Posts: 5
Joined: 06 Apr 2017, 12:12

Re: RPI3 + Hifiberry Digi+ problem with setting up

Postby hondagx35 » 09 Apr 2017, 12:35

Hi TripleSec,

for some unknown reason, your HW does not get detected correctly.
please try this version.

Frank
User avatar
hondagx35
 
Posts: 3042
Joined: 11 Sep 2014, 22:06
Location: Germany

Re: RPI3 + Hifiberry Digi+ problem with setting up

Postby TripleSec » 09 Apr 2017, 12:49

ok, are those instructions (hifiberry-dac-not-detected-after-kernel-update-t4180.html) the same for this version?
TripleSec
 
Posts: 5
Joined: 06 Apr 2017, 12:12

Re: RPI3 + Hifiberry Digi+ problem with setting up

Postby hondagx35 » 09 Apr 2017, 12:55

Hi,

TripleSec wrote:ok, are those instructions (hifiberry-dac-not-detected-after-kernel-update-t4180.html) the same for this version?

The new version should work out of the box.
You can enable the Hifiberry Digi on the settings page, no need for editing the config.txt file.

Frank
User avatar
hondagx35
 
Posts: 3042
Joined: 11 Sep 2014, 22:06
Location: Germany

Re: RPI3 + Hifiberry Digi+ problem with setting up

Postby TripleSec » 09 Apr 2017, 14:15

It doesn't work :cry:

I chose Hifiberry Digi on the settings page, then power off, then insert Hifiberry card and I can't access runeaudio on my browser.

Here is debug file (before inserting hifiberry card): https://pastebin.com/MWujVhtk


edit: I have borrowed RPI2 from a friend and it doesn't work too (with Hifiberry card inserted)...
Any ideas?
TripleSec
 
Posts: 5
Joined: 06 Apr 2017, 12:12

Re: RPI3 + Hifiberry Digi+ problem with setting up

Postby hondagx35 » 09 Apr 2017, 17:59

Hi,

the image works with Hifiberry Digi+ (pro) see here.
To be sure not to have a defective card, I would try the Hifiberry test image.

You also can try this.

Frank
User avatar
hondagx35
 
Posts: 3042
Joined: 11 Sep 2014, 22:06
Location: Germany

Re: RPI3 + Hifiberry Digi+ problem with setting up

Postby TripleSec » 10 Apr 2017, 19:02

I tried disabling EEPROM, but it didn't help. Does it matter where do I put this line (force_eeprom_read=0) in config.txt?

About Hifiberry test image:
I installed Raspbian and then established connection through SSH. Does it automatically mean that the card is working correctly?
How can I play some sample audio to test it? [headless - I have no HDMI monitor]
TripleSec
 
Posts: 5
Joined: 06 Apr 2017, 12:12

Re: RPI3 + Hifiberry Digi+ problem with setting up

Postby Stephane » 10 Apr 2017, 20:03

Hi,

You can type in the command "aplay -l" it should display something like
Code: Select all
 root@Garage(rw):~# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: sndrpihifiberry [snd_rpi_hifiberry_digi], device 0:
HifiBerry Digi HiFi wm8804-spdif-0 []
  Subdevices: 1/1
  Subdevice #0: subdevice #0



Envoyé de mon ONE E1003 en utilisant Tapatalk
Stephane
 
Posts: 64
Joined: 06 Feb 2017, 10:35

Re: RPI3 + Hifiberry Digi+ problem with setting up

Postby TripleSec » 10 Apr 2017, 21:28

Image

So, does it mean the card is defective?
Should I configure it somehow or it should work out-of-the-box?
TripleSec
 
Posts: 5
Joined: 06 Apr 2017, 12:12

support RuneAudio Donate with PayPal


Return to Raspberry Pi

Who is online

Users browsing this forum: Bing [Bot] and 6 guests