Hi all,
i have tried to set up a raspberry zero with rune audio and the "JustBoom Digi Zero pHAT". I found some very helpful hints in this thread an will now make a little summary of my way to partially success.
1. I downloaded the image of hpeter (many Thanks!) from
>this post< and put it on a 64 GB micro SD card.
2. I have no raspy 1, so i used a "USB to microUSB OTG Converter Shim" to get keyboard on the zero and a HDMI to Mini-HDMI Adapter to get something on the monitor.
3. I editet the etc/boot/config.txt and added:
- Code: Select all
arm_freq=1000
gpu_freq=300
core_freq=400
over_voltage=6
force_turbo=1
and
- Code: Select all
dtparam=audio=on
>like here<4. Then i edited /etc/netctl/test like this:
- Code: Select all
Description='wlan0 connection'
Interface=wlan0
Connection=wireless
Security=wpa-configsection
IP=dhcp
WPAConfigSection=(
'ssid="YOUR-SSID"'
'psk="YOUR-PASSPHRASE"'
'key_mgmt=WPA-PSK'
'proto=WPA'
'group=TKIP'
'pairwise=TKIP'
'priority=3'
)
>like here<5. Then reboot the system, but now with Micro USB WiFi Dongle (like
>This one<).
The dongle blinked blue and then the raspberry appeared on my router.
6. Now i have access with putty. And i can see and use the runeaudio-UI with
http://runeaudio/.
I have succesfully set up access to my NAS. So far, so good.
And again, many thanks for the advices in this thread!
7. Now i just will use the digital audio output of the JustBoom Digi pHAT, but my receiver (Yamaha RX-V371) remains silent.
If is use the HDMI-output of the Raspy and an HDMI-Input of die Receiver it worked, but that is no permanent solution.
What do i need to do to get the digital audio-outpoot work?
On the
>Justboom Software Guides Page < i found a "coming soon" for runeaudio.
And on the RuneAudio MPD Configuration-Site i just see the following 2 options for "Audio output interface":
* RaspberryPi HDMI out
* RaspberryPi Analog out
I tested both, but nothing worked.
Can someone help? Maybe
>my debug info< helps?
And maybe i should open another thread for this specific question?
Edit: now i found the Troubleshooting-Page
http://www.runeaudio.com/documentation/troubleshooting/rpi-troubleshooting/ with topic enabling digital output boards. I'll read it tomorrow.