Raspberry Pi 2 Model B Boot Issue

[pajjohnson]

So I have recently bought a raspberry pi 2 model b so that I can use rune on my audio system but everytime I boot the pi using rune it ends its process and leaves me with this

Code: Select all

PANIC: No working init found. Try passing init= option to kernal.  See Linus Documentation/init.txt for guidance

Entering kdb (current=0xee460000, pid 1) on processor 3 due to Keyboard Entry
[3]kdb

I have re-flashed the sd card many times to no avail. Each time the same message is at the end of the boot process before it stops.

I am using a regular SDHC 8gb sd card and at this point I do not understand why this happens on all the sd cards I try to use

Volumio is working currently, but I really want to try rune. Any help is greatly appreciated

[hondagx35]

Hi ,

i think you are doing something wrong with flashing the image.

- download the image from here
- unzip the file, you should get a file called

Code: Select all

RuneAudio_rpi2_0.3-beta_20150304_2GB.img

- follow this guide to flash the image.

I downloaded the image a few minutes ago and tested it.

Frank

[pajjohnson]

It still failed to boot properly again

Code: Select all

Entering kdb (current=0xee464e00, pid 0) on processor 3 Oops: (null)
due to oops @ 0xc0030580
dcpu: 3 PID: 0 comm: swapper/3 Not tainted 3.18.7-3 ARCH #1
dtest ee464e00 ti: ee48E000 task.ti: ee48e000

This was the beginning on the final display error.

Do you have any suggestions?

[hondagx35]

Hi pajjohnson,

Do you have any suggestions?

Are there any devices connected to your Pi?
If so please remove them.
Sorry, it is hard to help without having more information.

Frank

[pajjohnson]

So I have tryed booting it with only the HDMI, and Ethernet cable and it has failed again.
It says this right before freezing all activity

Code: Select all

kernal BUG at mm/rmap.c:921!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM

I have no idea what the issue could be, any help would be greatly appreciated