I have installed RuneAudio v0.3-beta on my Raspberry Pi 2B plus Digi+ sound card.
In the audio output menu the Digi+ option is missing however.
I can only choose analog or HDMI output.
I'm I doing something wrong?
by radekker » 21 Sep 2015, 07:07
by Gingko » 21 Sep 2015, 08:10
radekker wrote:I have installed RuneAudio v0.3-beta on my Raspberry Pi 2B plus Digi+ sound card.
In the audio output menu the Digi+ option is missing however.
I can only choose analog or HDMI output.
I'm I doing something wrong?
by hondagx35 » 21 Sep 2015, 11:35
You need to enable I2S in Settings before the option becomes available for selection.
Enable I2S output by selecting one of the available sets of modules (in this version you have to edit /boot/config.txt), specific for each hardware. Once set, the output interface will appear in the MPD configuration select menu, and modules will also auto-load from the next reboot.
by radekker » 22 Sep 2015, 18:30
by pzwief » 13 Dec 2015, 05:04
by hondagx35 » 13 Dec 2015, 16:48
As it's an embedded platform, the Raspberry Pi doesn't have a BIOS like you'd find on a conventional PC. The various system configuration parameters, which would traditionally be edited and stored using a BIOS, are stored in an optional text file named config.txt. This is read by the GPU before the ARM CPU (and Linux) is initialised; therefore it must be located on the first (boot) partition of your SD card, alongside bootcode.bin and start.elf. This file is normally accessible as /boot/config.txt from Linux and must be edited as root; but from Windows or OS X it is seen as a file in the only accessible part of the card. If you need to apply some of the config settings below, but you don't have a config.txt on your boot partition yet, then simply create it as a new text file.
Any changes will only take effect after you've rebooted your Raspberry Pi.
# Uncomment one of these lines to enable an audio interface
#device_tree_overlay=hifiberry-dac
#device_tree_overlay=hifiberry-dacplus
#device_tree_overlay=hifiberry-digi
#device_tree_overlay=hifiberry-amp
#device_tree_overlay=iqaudio-dac
#device_tree_overlay=iqaudio-dacplus
# Uncomment one of these lines to enable an audio interface
#device_tree_overlay=hifiberry-dac
#device_tree_overlay=hifiberry-dacplus
device_tree_overlay=hifiberry-digi
#device_tree_overlay=hifiberry-amp
#device_tree_overlay=iqaudio-dac
#device_tree_overlay=iqaudio-dacplus
by pzwief » 13 Dec 2015, 21:43
by gabcosse » 08 Jan 2017, 16:29
by hondagx35 » 08 Jan 2017, 17:03
hondagx35 wrote:......
Now you should be able to select the HifiBerry Digi+ under MENU->Mpd
Frank
by gabcosse » 08 Jan 2017, 19:37
hondagx35 wrote:Hi gabcosse,
welcome to Rune Audio.hondagx35 wrote:......
Now you should be able to select the HifiBerry Digi+ under MENU->Mpd
Frank
It is not on the settings page, but on Menu->MPD
Frank
support RuneAudio