Hi Lol999,
You can do this quite easily. Samba is the product which gives you file access to Rune over the network. In Rune this is normally switched off. If you go to the /dev UI and switch DEV mode on, Samba will be started automatically on the next reboot.
So set DEV mode on and reboot.
Then from the file explorer in windows Rune is then generally automatically visible. If not, you should be looking for //192.168.1.8/MusicStore/USB or //RuneAudio/MusicStore/USB
To stop Samba switch DEV mode off and reboot.
It is possible to switch Samba on as default. Then you need to log in via SSH and use the commands:
- Code: Select all
systemctl enable smbd
systemctl start smbd
With the standard configuration, Samba is not secure. It is advisable to check out the Samba documentation and adjust the /etc/samba/smb-prod.conf configuration file. Think about adjusting read-only parameters and/or add passwords if write access is to be used. There is a seperate /etc/samba/smb-dev.conf file which is used in DEV mode.
Via SSH you can Switch Samba off with the commands:
- Code: Select all
systemctl disable smbd
systemctl stop smbd
janui